Why choose Aluminum Shake Roofing?
Wood cedar shakes not what they used to be
- Old-growth forests almost non-existent
- No long term value: cedar is expensive and just does not last;
- Strain on our environment. We are using all of nature's limited resources
- Cedar shakes and shingles require major upkeep and maintenance
- Cedar and wood equals kindling. Wood burns and is extremely unsafe in the event of a fire
Concrete and Clay Tiles: more cons than pros
- Concrete tiles weigh between 10-20 lbs per square foot. Aluminum weights a 1/2 lb per square foot. An average roof might add 30-40 thousand pounds to your roof. Just imagine all the problems the additional weight can cause to a wood structure home.
- Tiles tend to become brittle and crumble over time.
- Not environmentally friendly. Tiles require a lot of energy and natural resources to produce
Warranties
Most other roofs come with an extended warranty, knowing full well that their product will not last. Manufacturers trick you with limitations, exclusions and pro-rations. Aluminum Shake Roofing is very different. Most importantly, we offer two types of warranties. We offer both a lifetime product warranty from the manufacturer and a 7-year workmanship warranty from the contractor, Aluminum Shake Roofing.
Country Manor Shakes
Country Manor Shake is an aluminum roofing system designed to capture the beauty and aesthetics of hand-split cedar shake roofs, but offers more durability and longevity. Its tough aluminum alloy, quality hI-R Kynar 500 reflective finish is fire resistant, provides protection against mold, mildew and corrosion from salt and moisture. It is a completely interlocking system which locks on all sides to to form a weather tight seal on your home for unbeatable wind resistance and protection.
Pre-Formed Flashings and Accessories:
- Hip and ridge caps
- Self-cleaning valley
- Starter strip and drip edge
- Gable edge trim and gable caps
- Sidewall flashing
- Vent pipe flashing
- Matching coil stock
- Color-matched butyl sealant
- RoofAquaGuard underlayment
- Aluminum screw shank nails
- Optional snow guards
- Available foam inserts for high traffic areas
Panel Measurements: 48″ x 12″; 25 panels per 100 square feet;
Weight: 46 pounds per square
Each Country Manor Shake panel is formed with the look of eight individual and deeply-grained simulated shakes of varying height, width, and thickness to duplicate the random three-dimensional appearance of real cedar shakes. The product’s low weight allows installation over many existing roofs.
Aluminum: .019” thick roofing panels; Matching accessories are .019” or .024” thick aluminum
All aluminum panels and accessories are made of 3105-H25 aluminum sheet (minimum tensile strength 26,000 psi; minimum yield strength 22,000 psi) or equivalent. The aluminum has minimum 95% recycled content.
Minimum Roof Pitch: 4:12 in snow areas, or 3:12 in standard conditions.
Finish: Industry-leading PVDF coating technology
Country Manor Shake panels and factory-formed accessories are protected with a two-coat, high performance Kynar 500® or Hylar 5000® PVDF resin-based finishes, which includes a protective primer and baked-on high-performance topcoat to resist chalking, fading, and deterioration. The finish includes reflective pigment to enhance the product’s energy efficiency.
Country Manor Shake is a Metal Construction Association Certified Metal Roofing Product.
STRONG
- Passed UL 580 uplift testing, simulating wind speeds of over 200 mph
- One of the most proven residential roofing products available
- Will not burn -- protects against flying embers from wildfires or chimneys
- Panels lock together rather than overlap like many metal systems
DURABLE
- Sheds ice and snow with reflected heat from the sun
- Will not absorb water and become waterlogged
- Will not rot or support insect infestation
- Self-cleaning “Open Valley” system leads the industry
- Lifetime Limited Warranty including Fade and Chalk Protection
ENVIRONMENTALLY SMART
- Energy Star Partner
- “Cool Coatings” reflect radiant heat
- Integral thermal break further enhances ability to keep homes naturally cooler
- Made from 95% post-consumer recycled aluminum
- Can usually be installed over existing roofs, reducing burden on landfills
Colors
About Us
Metal Roofing
Aluminum Shake Roofing Inc. has been providing durable metal (aluminum, copper, and stainless steel) roofs and exterior cladding to single family, multifamily, light commercial and institutional homes and buildings since 1989. We have the equipment and experience required to fabricate and install special custom metal fabrications for your project.
Multi Family Roofing
We have worked with many communities and associations of apartment owners or beach house owners to develop programs to solve their roofing problems, and to do so permanently. The process can happen quite quickly in just a couple of weeks, but most of the time will require several months or even a couple of years to actually decide what to do and how to phase the work so that it can work within your budget.
All you need to know about roof warranties
Permanent, aluminum County Manor Shakes (CMS) look great on a roof just like cedar does, but with out the drawbacks of wood. There’s also a manufacturer’s warranty covering 100 percent of the cost of materials and labor (not prorated) for forty years or more. This is in case of the need for repairs because of unlikely system failure in winds of 120 mph, Hawaii’s salty atmosphere, flaking paint or other problems that might arise.
Find comfort in a sturdy aluminum roofing system
The series of storms that Hawaii has experienced, which come with gusty trade winds and drenching rains is fairly typical each year. Many of Honolulu’s homeowners with aged or deteriorating roofs are worried that they would blow off or suffer severe damage. Similarly, people with leaky roofs worried about possible water damage inside their homes . Either of these occurrences would mean that expensive and stressful repairs were likely
Is it time to re-roof your house?
How does one go about buying a new roof? It’s not something you do everyday, nor is it a home improvement that people know a lot about. You not only have to select the correct roof product, but you have to select a competent and fair-minded contractor to install it. Some people think with their wallets, while others simply buy what their neighbor bought or take the recommendation of a friend. These are all good ways to buy – if you’re lucky.
Beauty meets durability with country manor shake roofing
One of Hawaii’s best looking roofs, installed locally by Aluminum Shake Roofing, is the Country Manor Shake (CMS) system. The CMS roof system was developed by Country Manor Shake roofing in 1974 and is currently manufactured in Ohio by Classic Products, You get the look of handsplit cedar shakes without the drawbacks.
Zappone Copper Shingles
Copper’s longevity is legendary. Interestingly, almost all the copper produced throughout time is still in use. And, in addition to being 100% recyclable, most architectural copper has a recycled content of around 75%.
Historically, copper has served as the ultimate roofing material of choice. It is not only tough, sturdy and highly adaptive, it is the only metal (with the exception of gold) to possess color. Copper is the only roofing material that actually improves with age. It may take many years to go from a bright, reddish-gold to dark brown and finally a soft gray-green. Although copper’s life may be measured in centuries, it can be pricey and the contractor must exhibit a fairly high degree of installation and know how.
Zappone Manufacturing has continuously manufactured solid copper shingles longer than anyone. Zappone is also internationally recognized as a pioneer and leader in the copper shingle industry.
Zappone combines all of the natural and desirable qualities of copper into an attractive and affordable roofing shingle. With a look that fits nearly every residential and commercial use and virtually every architectural style, it’s no wonder the Zappone Copper shingle is the best solid copper shingle on the market today. While it may be simpler to install Zappone Copper Shingles than other copper roof systems, it cannot be rushed and it is imperative that the installation be properly executed.
The Zappone Copper Shingle comes in a variety of sizes and patterns. The standard shingle measures a nominal 14-1/2 by 8 inches and the accent shingle is half the size, measuring 7-1/4 by 8 inches. The shingles can be made either with a “shadow cup”, which makes it easy to walk on or without, which requires a tapered EPS insert to make it walkable, The standard shingle is made from
Tough 12” 12 ounce copper, but can be fabricated using 16 ounce copper, if desired.
Oxford Shingle
Additional Information
Oxford Shingle is the perfect solution for someone who wishes to emulate the traditional look of a composite shingle roof while investing in the last roof they’ll ever need. The clean simple lines blend with any home and are accepted into any neighborhood. Many homeowners associations and architectural review boards have seen products like Oxford Shingle as being the key to allowing their residents to enjoy the many benefits of metal roofing.
The large interlocking panels minimize seams on the roof and feature all concealed fasteners.
Pre-Formed Flashings and Accessories:
- Hip / Ridge caps
- Self-cleaning valley
- Combination starter strip / drip edge
- Gable edge trim
- Sidewall flashing
- Vent pipe flashing
- Matching coil stock
- Color-matched butyl sealant
- Roof AquaGuard underlayments
- Aluminum screwshank nails
- Unique fastening clips
- Optional snow guards
- Available foam inserts for high traffic areas
Panel measurements: 60″ x 12″, 20 panels per 100 square feet;
Weight: 40 pounds per square
Oxford Shingles have a four-way interlock that locks each panel to the surrounding panels. The panels are secured to the roof using aluminum fastening clips. The clips, are attached to the panels’ top locks, allow the panels to expand and contract as necessary. The product’s low weight allows installation over many existing roofs.
Aluminum: .024” thick roofing panels; Matching accessories are .019” or .024” thick aluminum
All aluminum panels and accessories are made of 3105-H25 aluminum sheet (minimum tensile strength 26,000 psi; minimum yield strength 22,000 psi) or equivalent. The aluminum has minimum 95% recycled content.
Minimum Roof Pitch: 3:12
Finish: Industry-leading PVDF coating technology
Oxford Shingle is coated with a baked on protective primer and a Kynar 500® or Hylar 5000® PVDF resin-based coating to provide a high quality finish. Kynar 500® and Hylar 5000® are trade names for polyvinylidene fluoride resin. The backs of the panels are finished with a protective clear coat. The finish includes reflective pigment to enhance the product’s energy efficiency.
Learn More
- Available in a variety of Kynar 500® or Hylar 5000® PVDF resin-based finishes
- Concealed fasteners for ultimate protection
- Maintenance free: will not rust, crack, or rot
- Resists streaking and staining
- Works well for even harsh coastal applications
- Manufactured from heavy .024" thick 95% recycled content aluminum alloy
- Has passed wind tests required by Dade County, Florida.
- Will not burn and protects against flying embers from wildfires or chimneys
- Four-way interlocking panels hold tight
- Will not absorb water or become waterlogged
- Will not rot or support insects
- Fade and chalk resistant
- Lifetime Limited Warranty
- Energy Star Partner
- Sustainable
- "Cool Coatings" reflect radiant heat
- Made from 95% post-consumer recycled aluminum
- Can usually be installed over existing roofs; allows you to invest in a better roof rather than landfill disposal of your old one
Standing Seam
Standing Seam roofs are usually fabricated at the jobsite using virtually any metal, from a multiple of metal thickness and with many different protective metallic coatings. It can be fabricated using either painted or bare metal. The standing seam joints can be formed with many different types of interlock, either snap-lock or mechanically seamed. There are numerous types of clips and fasteners usually concealed within a panel’s seam. Of course, these concealed fasteners can be installed at different spacings. Most long panel metal roofs are not standing seam with concealed fasteners, but are simple overlapping panels where all the through-fasteners are exposed to the sky.
There are no “standard” flashing details to guide the homeowner or designer on how to properly select one system over another. You have to do your homework and know both what you want and how to specify it, and then, how to inspect the work being done.
Aluminum Shake Roofing Inc. is experienced in the proper methods of installation for standing seam roofing and we don’t cut corners. Our initial price is usually higher than your low bid, but the value is there. Owners have, on multiple occasions, hired ASR to later go back and replace that first, cheap roof after it has failed.
Project Gallery
Our Partners
